Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote

Sales & Support：sales@china-item.com

Home News

IP Equipment - Water Tests The Corresponding Standard

All Products
IEC/EN 60061 Standard (83)
IEC/EN 60065 Standard (14)
IEC/EN 60068 Standard (62)
IEC/EN 60112 Standard (10)
IEC/EN 60238 Standard (6)
IEC/EN 60332 Standard (9)
IEC/EN 60335 Standard (32)
IEC/EN 60529 Standard (50)
IEC/EN 60598 Standard (11)
IEC/EN 60601 Standard (8)
IEC/EN 60695 Standard (11)
IEC/EN 60884 Standard (5)
IEC/EN 60950 Standard (16)
IEC/EN 60968 Standard (15)
IEC/EN 61010 Standard (8)
IEC/EN 61032 Standard (54)
IEC/EN 61195 Standard (4)
IEC/EN 60745 Standard (8)
IEC/EN 62262 Standard (9)
IEC/EN 62560 Standard (9)
UL 1026 Standard (7)
UL 1205 Standard (4)
UL 1244 Standard (5)
UL 1278 Standard (7)
UL 498 Standard (4)
UL 507 Standard (10)
UL 746A Standard (8)
BS 1363 Standard (4)
VDE 0620 Standard (8)
AS/NZS 3112 Standard (6)
Other Standard (139)
Good quality IEC/EN 60065 Standard for sales
Good quality IEC/EN 60065 Standard for sales
Our goods has safely arrived at our residence. Thank you for your excellent services. I hope we can cooperate again in the future.

—— Wira

I'm Online Chat Now
Company News
IP Equipment - Water Tests The Corresponding Standard
Description European standards Other standards
Drip box for tests of verification against the fall of the drops - IPX1 and IPX2 degrees CEI EN 60529 fig. 3 
CEI 70-1		 IEC 529
Automatic equipment to test protection against splashing and spraying water - IPX3 and IPX4 degrees CEI EN 60529  Fig. 4 IEC 529
Hand-held equipment to prove protection against splashing and spraying water (IPX3 and IPX4 Degrees) CEI EN 60529 
CEI 70-1		 IEC 529
NOZZLES, normalized, interchangeable for tests against water bolts with hole ? 6, 3 mm IPX5 - hole ? 12, 5 mm IPX6, with handgrip complete with pressure gauge and adjusting cock CEI EN 60529 Fig. 6 IEC 529
Tank for immersion tests - "IPX7" degree CEI EN 60529 IEC 529
Under pressure tank for immersion tests - "IPX8" degree CEI EN 60529 IEC 529
Equipment to test protection against dust (IP5X and IP6X Degrees) CEI EN 60529 
CEI 70-1		 IEC 529
 

 

Pub Time : 2015-06-16 09:51:42 >> News list
Contact Details
SHENZHEN JULIXING INSTRUMENTS CO., LTD.

Contact Person: Mr. Eason Wang

Tel: 86-755-33168386

Fax: 86-755-61605199

Send your inquiry directly to us (0 / 3000)

IEC/EN 60061 Standard

IEC60061 E27 Go/no-go Gauge, E27 Go No Go Thread Gauge for 7006-27B-1 and 7006-28A-1

IEC60061 E14 Go No Go Gauge of 7006-27F-1 & 7006-28B-1

IEC60061 B22 Go No Go Gauge of 7006-11-8 & 7006-10-8

IEC60061-3 7006-45-4 G13 Go Gauge for Bi-Pin Cap on Finished Lamp

IEC/EN 60068 Standard

The spring hammer of IEC 60068-2-75

IEC60068-2-75 Spring Impact Hammer Test Apparatus

0.50J IK04 Single Energy Impact Hammers of IEC60068-2-75

Impact Spring Hammer Universal

IEC/EN 61032 Standard

Probe B IP2X Test Finger of IEC Standard Test

IEC 61032 Fig.4 Test Probe D IP4X 1 mm Test Wire with 3N Force

Straight Jointed Test Finger

15mm Safety Pins Test Probe 13 of IEC 61032 Figure 9

Request A Quote

E-Mail | Sitemap

Mobile Site
Privacy Policy China Good Quality IEC/EN 60061 Standard Supplier. Copyright © 2016 - 2022 www.iec60061.com. All Rights Reserved. Developed by JULIXING