 |
Related gauges for E17 caps: 1. Go gauge for caps on finished lamps E17, 7006-27K-1; Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E17 caps on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the ... Read More
|
| |
Description European standards Other standards Drip box for tests of verification against the fall of the drops - IPX1 and IPX2 degrees CEI EN 60529 fig. 3 CEI 70-1 IEC 529 Automatic equipment to test protection against splashing and spraying water - IPX3 and IPX4 degrees CEI EN 60529 Fig. 4 IEC 529 ... Read More
|
| |
Description European standards Other standards PENDULUM IMPACT TEST APPARATUS EN 61058-1 Fig. 1 EN 60669-1 EN 60238 EN 60238/A1/A2 CEI 23-50 EN 50083-1 EN 50102/A1 EN 60068-1 CEI 23-32 V1 EN 60068-2-75 CEI 23-12/1 IEC 60238 IEC 884-1 IEC 50083 IEC 68-2-62 IEC 60309-1 LOW TEMPERATURES IMPACT TEST ... Read More
|
| |
Description European standards Other standards INCLINED PLANE DEVICE EN60950,VDE0700,VDE0730, EN60335-1 IEC60065,IEC60335-1,IEC60950 IEC60601-1 SPRING IMPACT HAMMER EN60400,EN60598,VDE0616, VDE0711 IEC60065,IEC60335-1,IEC60601, IEC60068-2-75,IEC519-1,IEC60598-1, IEC1058-1,UL1244 SPRING IMPACT HAMMER ... Read More
|
| |
Description European standards Other standards flexing TEST APPARATUS VDE0472 IEC227-2 、 IEC245-2 、 IEC60227-2 、 IEC60245-2 （ ed2 ）、 UL1581 low temperature bending TEST Apparatus IEC540 Wire printing fastness test APPARATUS VDE0472 UL1581 Wire and cable wear test APPARATUS IEC245-4 Read More
|
| |
Description European standards Other standards test device suitable for checking security of lampholcler contacts EN60598 IEC60598 fig2 test device suitable for winding a flexible pipe EN60598 IEC60598 fig3 Lamp torque testing device EN60598 IEC60598 draught proof enclosure EN60598 IEC60598 ANNEX D ... Read More
|
| |
The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and ... Read More
|
| |
The International Electrotechnical Commission (in French:Commission électrotechnique internationale) is a non-profit, non-governmental international standards organization that prepares and publishes International Standards for all electrical, electronic and related technologies – collectively known ... Read More
|
| |
Another major difference between the UL and IEC standards is the probe used to determine accessibility of live parts and parts capable of causing injury, the UL Articulated Accessibility Probe and the IEC Test Finger as shown below: 1. UL Articulated Accessibility Probe 2. IEC Test Finger (Test ... Read More
|
| |
Specimens molded from the plastic material are oriented in either a horizontal or vertical position depending on the specifications of the relevant test method, and they are subjected to a defined flame ignition source for a specified period of time. In some tests, the test flame is only applied ... Read More
|
