 |
A person new to the inspection and metrology of threaded parts finds a plethora of gauge types existing in the inspection of screws and nuts. Their terminology and significance can be confusing, but this article is meant to explain them in a simple way. In production shops, the inspection of ... Read More
|
| |
Related gauges for E14 caps: 1. Go gauge for E14 caps on finished lamps, 7006-27F-1; Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E14 caps on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the ... Read More
|
| |
Related gauges for E12 caps: 1. Go gauge for caps on finished lamps E12, 7006-27H-1; Purpose: To check the maximum dimensions of the screw thread and dimension T1 minimum of E12 caps on finished lamps. Testing: When the cap on a finished lamp has been screwed into the gauge as far as it will go, the ... Read More
|
| |
This is the most common thermocouple type that provides the widest operating temperature range. Type K thermocouples generally will work in most applications because they are nickel based and have good corrosion resistance. •1.Positive leg is non-magnetic (Yellow), negative leg is magnetic (Red). •2... Read More
|
| |
Safety Testing / Surge Testing Description There are a variety of Electrical Safety Testing and Surge Testing Equipment available that enables the user or manufacturer to test the integrity of electrical insulation, electrical isolation, component specifications, cable / connection bonding or ... Read More
|
| |
Right caps for the right lamps Precision adjustment to standards There are dozens of models of lamps for countless applications, for residential, industrial and office lighting, for domestic appliances, medical lighting and projection equipment, within the automotive industry, etc. Lamp caps and ... Read More
|
| |
Protect your electrical enclosure and its contents by knowing where and how it will be used so that you can order one with the correct IP Rating. An IP (Ingress Protection) rating is used by buyers in Europe to specify the extent of protection an electrical enclosure has against environmental ... Read More
|
| |
CAT. NO. DESCRIPTION CX-2094MI MULTITESTER CX-DV-20 WATER DISTILLER (20l/h) CX-DV-8 WATER DISTILLER (8l/h) CX-KK-3500 CLIMATIC CHAMBER 3552 L (1200x1600x1850 mm), 10°C to + 70 °C, RH 30 to 95 % CX-KK1000 CLIMATIC CHAMBER 1000 L, 5°C to + 95 °C, RH 15 to 95 % CX-KK1000 CHL CLIMATIC CHAMBER 1000 L ... Read More
|
| |
Article Description European standards Other standards REMARK G01.01 “GO”GAUGE FOR E14 CAPS ON FINISHED LAMPS EN60061-3 IEC60061-3 7006-27F-1 G01.02 “NOT GO” GAUGE FOR E14 CAPS ON FINISHED LAMPS EN60061-3 IEC60061-3 7006-28B-1 G01.03 GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING ... Read More
|
| |
A go/no-go thread gauge is an instrument used by manufacturers to check that threaded parts such as screws and nuts have been made to the proper specifications--that is, that they're of the right size and that they're threaded in the right direction. Plug Gauges and Ring Gauges Go/no-go thread ... Read More
|
